0

You have no items in your shopping cart.

MotoRacingShopClose
 

Product was successfully added to your shopping cart.
PBR
Front sprocket chain 520 PBR for KTM 620 Duke 94-98
Front sprocket chain 520 PBR for KTM 620 Duke 94-98 Front sprocket chain 520 PBR for KTM 620 Duke 94-98

Front sprocket chain 520 PBR for KTM 620 Duke 94-98

Product code: 1252 18NC_dpp_0

Availability: In stock

Regular Price: €17.36

Special Price €13.88

-20%

€17.36

€13.88

-20%

Previous price €13.88

* Required Fields

Warning! You are ordering an item that is not available
Notify me when it's back in stock
Notify me when it's back in stock
Enter your email, we will notify you as soon as the product becomes available again from the supplier.
Subscription successful Error on the procedure
Similar products
Similar products
Back to product

Delivery time

In the SHOPPING CART you will find the estimated shipping date for your order.

The ORDER will be shipped when all the products are ready.



When the product is not available from manufacturer/supplier, or when the product is on request and the manufacturer need to produce it, delivery time can may vary and will be communicated to you by our order department when taking charge of the order.

Check compatibilty with your motorbike
Return
Easy
Compatibility
Guaranteed
Size change
No problem
Shipping
Express
100% secure payments
Similar products
Video
Description

Details

Standard ratio husqvarna enduro 701 17-19: 15
Standard ratio husqvarna supermoto 701 16-19: 15
Standard ratio husqvarna svartpilen 701 19-19: 16
Standard ratio husqvarna vitpilen 701 18-19: 16
Standard ratio ktm adventure 790 18-20: 16
Standard ratio ktm adventure r 790 20-20: 16
Standard ratio ktm duke 620 94-98: 17
Standard ratio ktm duke 690 08-19: 16
Standard ratio ktm duke 790 17-20: 16
Standard ratio ktm duke r 690 09-19: 16
Standard ratio ktm enduro r 690 08-18: 15
Standard ratio ktm exc racing 400 06-10: 15
Standard ratio ktm lc4 adventurer r 640 99-06: 16
Standard ratio ktm lc4 duke ii 640 00-03: 17
Standard ratio ktm lc4 duke ii 640 04-06: 17
Standard ratio ktm lc4 e enduro 620 00-02: 16
Standard ratio ktm lc4 e enduro 640 00-06: 16
Standard ratio ktm lc4 enduro 600 88-89: 15
Standard ratio ktm lc4 enduro 600 90-90: 15
Standard ratio ktm lc4 enduro 600 91-93: 15
Standard ratio ktm lc4 enduro 620 90-93: 15
Standard ratio ktm lc4 enduro 620 94-99: 14
Standard ratio ktm lc4 sc supermoto 625 02-02: 16
Standard ratio ktm lc4 super moto 640 99-06: 17
Standard ratio ktm smc 625 04-04: 16
Standard ratio ktm smc 660 03-04: 16
Standard ratio ktm smc 660 05-06: 17
Standard ratio ktm smc 690 08-10: 16
Standard ratio ktm smc r 690 12-20: 16
Standard ratio ktm supermoto 690 07-10: 16
Standard ratio ktm sxc 625 03-06: 16
In the list above, when not indicated, the item is for standard chain.

PBR manufacturers in Italy and sells motorcycle sprockets (front and rear sprockets, chains and complete kits) and wide range of accessories (handlebars, clip-on handlebars, handlebars weights, handlebar clamp kits, bike stand knobs, chain grease and cleaner, crash pads and mecdraulic).
We take part at the most important national and international competitions and events.
Thanks to our presence on the international markets, our well-know brand, our competence and our service we are the first choice of the major market operators.
All this could be enough to sum up our activity during the last quarter of century, but it is also right to mention that this is the result of years of research and development, tests, technical improvements, careful selection of raw materials and production processes, combined with the manual ability of specialized craftsmen along with the high precision of CNC industrial technologies.As a result, special productions of prototypes and models for racing purposes are possible together with series production capacity for the industrial market.
 
 
Remember to select the right ratio in the products options.
 
Front Sprockets (counter shaft) are  made of chromoly steel, machined all over for accuracy. Many of these are available drilled and machined for lightness. (normally 520 and 415)

Rear sprockets are essentially two types: stainless steel and aluminum.
Every sprocket is made on precision, computer controlled equipment. The teeth are machined to the latest standards, for maximum chain life and more efficient power transmission. The teeth and the outside diameter are cut at the same time. This makes sure the teeth are concentric to the sprocket center.
Every sprocket is made from heat treated 7075-T6 aluminum, hard anodized finished for extra durability

  • Steel: ideal replacement of the OEM part, where quality is not better is the same of the original.
    Every sprocket is heat treated through an induction hardening then tempered to produce exactly the correct hardness for durability and efficient power delivery. To correct any distortion that may have occurred during these stages, the sprockets are put through a special flattening machine. For corrosion resistance, the steel sprockets are bright zinc plated.
     
  • Aluminum: the max for those who want to light final transmission or have on board an accessory that on expert riders have. Usually we have on stock 520 or 415 sprockets but original pitch could be ordered.
    Made from heat treated 7075-T6 aluminum we offer them only hard anodize finished for an extend life time.
Example front sprockets machined for lightness:
 
Example rear stell sprocket:
 
Example rear ergal sprocket:
 
Example rear ergal colored sprocket:
 
Example rear ergal hard racing sprocket:
 
 
 
 
 
 

By choosing the ratios, 1 front sprocket cog is equal to about 3 rear sprocket cogs (the exact ratio is given by: number of rear sprocket teeth / number of front sprocket teeth).
The above stated, ratios have to be chosen in a way that a max. difference of 2 cogs is not exceeded. This way, you can always keep the same chain length. The Kawasaki ZX-10R Ninja is an exception: a rear chain with over 1 tooth more than the stock one cannot be used, since length of stock chain will not allow that. Remember that if you want more acceleration you have to mount a rear sprocket with more toothing, or a front sprocket with lower toothing. Ratios have to be necessarily and exclusively chosen by yourself. It is usual to mount a rear sprocket with 2 teeth more than the stock one, but that is however a medium choice which does not mean to be satisfying to everybody.
In a circuit, generally the right final ratio will be that allowing to achieve, at the highest gear, about 200 rpm more than the max power rate, always staying 200 / 300 rpm under the maximum rate the engine can reach. This way, you can take advantage of the trail of the driver who is preceding you.
Choosing the final ratio, remember that the bigger it is, the more the acceleration will be. But if it is too big, you will lose speed. If on the contrary the ratio is too small, you will lose acceleration and will not manage to reach the maximum speed.

If your final transmission has exceeded 5000 km, we advise not to change only one of the three components, but to change them altogether (chain,rear and front sprockets). This, because final transmission would otherwise deteriorate in very few kilometres.

For the best working and longer duration of the transmission, it needs to be cleaned and lubricated every 1000 Km at least, using our specific cleaner and lubrificant for chains that you find here.

PBR's catalogue

Compatible model years
KTM Duke 620 1994
KTM Duke 620 1995
KTM Duke 620 1996
KTM Duke 620 1997
KTM Duke 620 1998
Spare part compatible with
Reviews
Product Questions
No Questions
Google Review Widget

The reviews are not verified.

Google Review Widget

The reviews are not verified.