Coolant Motul Motocool Factory Line 1L

MOTUL MOTOCOOL FACTORY LINE is a racing cooling liquid, ready to use, based on monoethyleneglycol, using organic anti-corrosion additives (OAT – Organic Acid Technology) to provide an outstanding protection to aluminium/magnesium alloys used by bike manufacturers on new engines design.

PERFORMANCES:

Cooling system optimal protection from freezing and metallic parts from corrosion.
Specific anti-corrosion agents provides the best protection efficiency on aluminium/magnesium alloys – according to a dynamic corrosion test performed on a bike radiator, MOTOCOOL FACTORY LINE divides by 3 the corrosion rate compared to a common organic coolant.
Provides an excellent thermal exchange and then engine cooling efficiency and prevents from boiling.
This organic OAT technology provides anti-corrosion properties that remain while high temperature and ageing.
Low corrosion inhibitors consumption allows extended drain intervals.
Water pumps protection, avoid cavitation.
Seals, rubber pipes and plastic parts friendly.
Contains a bitterness agent to prevent from drinking: coolants and antifreezes have a sweettaste but are harmful.

RECOMMENDATIONS:

Ready to use, do not add any water.
Drain intervals: Refer to the manufacturers' recommendation.
Do not mix with non-organic products.
This product should not be used to protect drinking water systems against freezing.

FEATURES:

Color Red
Does not contain Nitrites, Amines, Phosphates, Borates and Silicates.
Density at 20°C/68°F ASTM D4052 1.072
pH ASTM D1287 8.5
Antifreeze protection ASTM D1177 -35°C / -31°F
Boiling point 136°C / 277°F (+1.5 bar)
Alkalinity reserve ASTM D1121 2.9 mg KOH/g